9.1.5.1. Full Curtain wall

Curtain walls can be created two ways:

• 1. By creating a corner window by the Modeling/Window - Edit custom/corner window command. This command is advisable to use if you want to create windows with complex profiles and glass plane patterns in a single wall or in two connected walls at the corner.

• 2. Convert the whole wall into window use the Wall shortcut menu- Opening - Full Curtain Wallcommand.

This command will convert the whole wall into a window. The glass properties can be set in the Modeling/Properties - Curtain wall dialog.

&See Chapter 9.3.4.5. Corner window for a description.

Curtain wall has the following properties:

• The window can extend as far as the wall ends.

• Divisions can be created in X an Y directions by specifying either the number of divisions or the glass plane dimensions in horizontal and vertical directions. It is possible to define unequal divisions, too.

• At the sides of the window it is possible to switch off the frames so you can see only the glass plane edges.